OCEAN-072 MAWSONIA

PaleoVentures presents the Mawsonia as figure number 072 of its Ocean Series!

Mawsonia is a 6-meter (20 ft) long prehistoric member of the coelacanth family, which also includes today’s coelacanths, which are known for being “living fossils”! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 6.5 cm (2.5 in) wide
• Approx. 5 cm (2 in) tall
• Made of PLA and hand-painted

Be sure to add the Mawsonia to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

OCEAN-071 PROTOCETUS

 PaleoVentures presents the Protocetus as figure number 071 of its Ocean Series!

As an early whale, Protocetus had a streamlined, whale-like body but with primitive features such as small hind flippers and webbed front toes! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 10 cm (4 in) long
• Approx. 3.5 cm (1.4 in) tall
• Made of PLA and hand-painted

Be sure to add the Protocetus to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

OCEAN-070 MAUISAURUS

 PaleoVentures presents the Mauisaurus as figure number 070 of its Ocean Series!

The first known plesiosaur from New Zealand, Mauisaurus is named after Māui, a Māori mythological demigod who is said to have pulled New Zealand up from the seabed using a giant fish hook! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 7 cm (2.8 in) wide
• Made of PLA and hand-painted

Be sure to add the Mauisaurus to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

OCEAN-069 EURHINOSAURUS

PaleoVentures presents the Eurhinosaurus as figure number 069 of its Ocean Series!

Eurhinosaurus’ upper jaw is more than twice as long as its lower jaw, similar to today’s swordfish! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 5 cm (2 in) wide
• Made of PLA and hand-painted

Be sure to add the Eurhinosaurus to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

OCEAN-068 TRINACROMERUM

PaleoVentures presents the Trinacromerum as figure number 068 of its Ocean Series!

A member of the polycotylid family, the overall appearance and body shape of Trinacromerum has been likened by scientists to a "four-flippered penguin"! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 10 cm (4 in) long
• Approx. 7.5 cm (3 in) wide
• Made of PLA and hand-painted

Be sure to add the Trinacromerum to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

OCEAN-067 CLADOSELACHE

  PaleoVentures presents the Cladoselache as figure number 067 of its Ocean Series!

Cladoselache was similar in body shape to some types of modern sharks such as mako sharks and great white sharks, but was not closely related to any modern shark, but actually more closely related to the ghost shark! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 6 cm (2.4 in) wide
• Made of PLA and hand-painted

Be sure to add the Cladoselache to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

GALLOP INTO THE YEAR OF THE HORSE

 

Happy Chinese/Lunar New Year from Paleo-Ventures!

To celebrate the Year of the Horse, Paleo-Ventures unveils one of its future additions for the Ceno Series: the Mesohippus, an early stage in the evolution of the horse!

UPCOMING MODELS - CENO SERIES WAVE 13

  Paleo-Ventures teases the next wave of figures in its Ceno Series! Try to guess what they are based on the preview picture and the clues below!

073 - ????

A predatory South American marsupial!

074 - ???

One of the first elephants to possess a true trunk!

075 - ???

One of the largest crocodilians from the Cenozoic era!

076 - ???

An early stage in the evolution of the horse!

077 - ???

A herbivore with a bizarre set of horns!

078 - ???

The largest bird to have ever roamed the continent of Australia!

CENO-072 ADZEBILL

   PaleoVentures presents the Adzebill (Aptornis) as figure number 072 of its Ceno Series! 

The beak of this flightless bird from New Zealand is massive, pointed and down-curved, resembling a woodworking tool called an adze (which the bird is named after), which it used for digging out prey like lizards, insects, and possibly roots! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 9 cm (3.5 in) long
• Approx. 4.5 cm (1.8 in) wide
• Approx. 6.5 cm (2.5 in) tall
• Made of PLA and hand-painted

Be sure to add the Adzebill to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

CENO-071 CRANIOCERAS

 PaleoVentures presents the Cranioceras as figure number 071 of its Ceno Series! 

Cranioceras is known for its unique three-pronged headgear: two straight horns above its eyes and a distinctive curved horn on the back of its skull! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 7 cm (2.8 in) long
• Approx. 4 cm (1.6 in) wide
• Approx. 6.5 cm (2.5 in) tall
• Made of PLA and hand-painted

Be sure to add the Cranioceras to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

CENO-070 LEPTICTIDIUM

  PaleoVentures presents the Leptictidium as figure number 070 of its Ceno Series! 

Leptictidium may look like a combination of several types of placental mammals, but is actually a type of non-placental eutherian! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 10 cm (4 in) long
• Approx. 5 cm (2 in) wide
• Approx. 5 cm (2 in) tall
• Made of PLA and hand-painted

Be sure to add the Leptictidium to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

CENO-069 GOMPHOTHERIUM

 PaleoVentures presents the Gomphotherium as figure number 069 of its Ceno Series! 

Like its cousins Amebelodon and Platybelodon, Gomphotherium had an elongated lower jaw with tusks which it may have used to cut through vegetation while it was being held in place by its trunk! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 9 cm (3.5 in) long
• Approx. 4 cm (1.6 in) wide
• Approx. 6.5 cm (2.5 in) tall
• Made of PLA and hand-painted

Be sure to add the Gomphotherium to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

CENO-068 PACHYCROCUTA

 PaleoVentures presents the Pachycrocuta as figure number 068 of its Ceno Series! 

Pachycrocuta is also known as the giant short-faced hyena, and was the largest hyena that had ever lived! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 10 cm (4 in) long
• Approx. 5.5 cm (2.2 in) wide
• Approx. 6 cm (2.4 in) tall
• Made of PLA and hand-painted

Be sure to add the Pachycrocuta to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

CENO-067 PALORCHESTES

PaleoVentures presents the Palorchestes as figure number 067 of its Ceno Series! 

Palorchestes is also known as the 'bear-sloth' marsupial or marsupial 'tapir', for its enormous snout that ended with a fleshy nose! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 8.5 cm (3.3 in) long
• Approx. 5 cm (2 in) wide
• Approx. 6 cm (2.4 in) tall
• Made of PLA and hand-painted

Be sure to add the Palorchestes to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

UPCOMING MODELS - DINO SERIES WAVE 13

Paleo-Ventures teases the next wave of figures in its Dino Series! Try to guess what they are based on the preview picture and the clues below!

073 - ????

A small ornithopod from the Jurassic!

074 - ???

Not a dinosaur, but a large, armoured reptile from the late Permian!

075 - ???

The first dinosaur known to have sported wing membranes!

076 - ???

A thick-skulled dinosaur that is closely related to Pachycephalosaurus!

077 - ???

An Iguanodon-like dinosaur from the Jurassic!

078 - ???

An armoured dinosaur covered in bony plates and spikes!

DINO-072 YUTYRANNUS

 PaleoVentures presents the Yutyrannus as figure number 072 of its flagship Dino Series! 

Yutyrannus is the largest-known dinosaur to have fossils that preserve direct evidence of feathers! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 11 cm (4.3 in) long
• Approx. 6.5 cm (2.5 in) tall
• Made of PLA and hand-painted

Be sure to add the Yutyrannus to your dinosaur collection along with the other prehistoric creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

DINO-071 SCELIDOSAURUS

PaleoVentures presents the Scelidosaurus as figure number 071 of its flagship Dino Series! 

Scelidosaurus was one of the oldest known and most "primitive" of the thyreophorans, the family of armoured dinosaurs that would give rise to the Stegosaurus and Ankylosaurus! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 5.5 cm (2.2 in) tall
• Made of PLA and hand-painted

Be sure to add the Scelidosaurus to your dinosaur collection along with the other prehistoric creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

DINO-070 SAUROLOPHUS

 PaleoVentures presents the Saurolophus as figure number 070 of its flagship Dino Series! 

Unlike the hollow crests of hadrosaurs such as Parasaurolophus and Lambeosaurus, Saurolophus had a solid, bony crest on its head! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 10.5 cm (4 in) long
• Approx. 6 cm (2.4 in) tall
• Made of PLA and hand-painted

Be sure to add the Saurolophus to your dinosaur collection along with the other prehistoric creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

DINO-069 ORNITHOLESTES

 PaleoVentures presents the Ornitholestes as figure number 069 of its flagship Dino Series! 

Like Oviraptor, Ornitholestes‘ name is also based on an early belief about its diet, as birds have not really come into their own until the late Cretaceous! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 11 cm (4.3 in) long
• Approx. 6 cm (2.4 in) tall
• Made of PLA and hand-painted

Be sure to add the Ornitholestes to your dinosaur collection along with the other prehistoric creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

DINO-068 MAMENCHISAURUS

 PaleoVentures presents the Mamenchisaurus as figure number 068 of its flagship Dino Series! 

Mamenchisaurus is known for having the longest neck to body ratio of any dinosaur of its kind, sometimes over half its total length! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 10 cm (4 in) long
• Approx. 8 cm (3 in) tall
• Made of PLA and hand-painted

Be sure to add the Mamenchisaurus to your dinosaur collection along with the other prehistoric creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

DINO-067 CHASMOSAURUS

 PaleoVentures presents the Chasmosaurus as figure number 067 of its flagship Dino Series! 

The frill of Chasmosaurus spread out over its head in an enormous rectangle, and may have been lined with blood vessels that allowed it to take on bright colours to attract mates during mating season! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 9.5 cm (3.7 in) long
• Approx. 6.5 cm (2.5 in) tall
• Made of PLA and hand-painted

Be sure to add the Chasmosaurus to your dinosaur collection along with the other prehistoric creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.