UPCOMING MODELS - OCEAN SERIES WAVE 15

Paleo-Ventures teases the next wave of figures in its Ocean Series! Try to guess what they are based on the preview picture and the clues below!

085 - ???

A jawless, armoured fish shaped like a frying pan!

086 - ???

A mosasaur with strong jaws!

087 - ???

A placodont that resembled a small turtle!

088 - ???

A large predatory ichthyosaur from the middle Triassic!

089 - ???

A jawless fish known for having a crescent-shaped head!

090 - ???

One of the earliest ichthyosaurs that may also have lived on land!

OCEAN-084 WIWAXIA

   PaleoVentures presents the Wiwaxia as figure number 084 of its Ocean Series!

Wiwaxia was a small Cambrian invertebrate that lived and fed at the sea floor and was covered in carbonaceous scales and spines that protected it from predators! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 8 cm (3 in) long
• Approx. 5.5 cm (2.2 in) wide
• Approx. 5 cm (2 in) tall
• Made of PLA and hand-painted

Be sure to add the Wiwaxia to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

 

OCEAN-083 HAUFFIOSAURUS

 PaleoVentures presents the Hauffiosaurus as figure number 083 of its Ocean Series!

As a basal pliosaurid, Hauffiosaurus had a long, thin snout and still had a long neck similar to plesiosaurids! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 11 cm (4.3 in) long
• Approx. 7 cm (2.8 in) wide
• Approx. 3 cm (1.2 in) tall
• Made of PLA and hand-painted

Be sure to add the Hauffiosaurus to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

 

OCEAN-082 FUTABASAURUS

PaleoVentures presents the Futabasaurus as figure number 082 of its Ocean Series!

The first elasmosaurid found in Japan, Futabasaurus was named after the Futaba Group in Fukushima, Japan, in which it was discovered! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 8 cm (3 in) wide
• Approx. 6.5 cm (4.7 in) tall
• Made of PLA and hand-painted

Be sure to add the Futabasaurus to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

 

OCEAN-081 ARANDASPIS

  PaleoVentures presents the Arandaspis as figure number 081 of its Ocean Series!

Before the discovery of the first ever fish from the Cambrian period, Arandaspis was originally regarded as the oldest ever fish! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 10 cm (4 in) long
• Approx. 4 cm (1.6 in) wide
• Approx. 4 cm (1.6 in) tall
• Made of PLA and hand-painted

Be sure to add the Arandaspis to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

 

OCEAN-080 PISTOSAURUS

  PaleoVentures presents the Pistosaurus as figure number 080 of its Ocean Series!

With flippers similar to the later plesiosaurs, Pistosaurus is known as the oldest "subaquatic flying" reptile on Earth! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 5 cm (2 in) wide
• Approx. 3.5 cm (1.4 in) tall
• Made of PLA and hand-painted

Be sure to add the Pistosaurus to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

 

OCEAN-079 MIXOSAURUS

 PaleoVentures presents the Mixosaurus as figure number 079 of its Ocean Series!

Mixosaurus got its name from its appearance which suggested it to be a transitional form between eel-shaped ichthyosaurs such as Cymbospondylus and the later dolphin-shaped ichthyosaurs such as Ichthyosaurus! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 5 cm (2 in) wide
• Approx. 5 cm (2 in) tall
• Made of PLA and hand-painted

Be sure to add the Mixosaurus to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

 

UPCOMING MODELS - CENO SERIES WAVE 15

 Paleo-Ventures teases the next wave of figures in its Ceno Series! Try to guess what they are based on the preview picture and the clues below!

085 - ????

A horned rodent from the Neogene!

086 - ???

A running crocodile with hooves!

087- ???

A large sloth similar to the Megatherium!

088 - ???

The largest rabbit to ever live on Earth!

089 - ???

A tusked, tapir-like South American mammal!

090 - ???

A hippo-like creature that inhabited saltwater coasts!

CENO-084 PANOCHTHUS

PaleoVentures presents the Panochthus as figure number 084 of its Ceno Series! 

Panochthus is a member of the "Austral clade", one of the two main groups of glyptodonts where the other group is the "traditional glyptodontines" which includes Glyptodon and Doedicurus! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 6 cm (2.4 in) wide
• Approx. 5 cm (2 in) tall
• Made of PLA and hand-painted

Be sure to add the Panochthus to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

CENO-083 BARYTHERIUM

   PaleoVentures presents the Barytherium as figure number 083 of its Ceno Series! 

Barytherium was one of the first large members of the elephant family to appear in the fossil record! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 5.5 cm (2.2 in) wide
• Approx. 6.5 cm (2.5 in) tall
• Made of PLA and hand-painted

Be sure to add the Barytherium to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

CENO-082 AILURARCTOS

PaleoVentures presents the Ailurarctos as figure number 082 of its Ceno Series! 

Besides being a possible ancestor of the panda, Ailurarctos was also one of the oldest known members of the bear family to evolve! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 5 cm (2 in) long
• Approx. 5 cm (1.8 in) wide
• Approx. 6.5 cm (2.6 in) tall
• Made of PLA and hand-painted

Be sure to add the Ailurarctos to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

CENO-081 PAKICETUS

 PaleoVentures presents the Pakicetus as figure number 081 of its Ceno Series! 

Most scientists regard Pakicetus as the most basal member of the whale family, representing a transitional stage between hoofed land mammals and whales! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 5 cm (2 in) wide
• Approx. 6 cm (2.4 in) tall
• Made of PLA and hand-painted

Be sure to add the Pakicetus to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

CENO-080 GREAT AUK

     PaleoVentures presents the Great Auk as figure number 080 of its Ceno Series! 

The only flightless seabird in the northern hemisphere, the great auk was the second largest member of the auk family, second only to its Miocene cousin Miomancalla, and its closest living relative is the razorbill! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 6 cm (2,4 in) long
• Approx. 4 cm (1.6 in) wide
• Approx. 6.5 cm (2.5 in) tall
• Made of PLA and hand-painted

Be sure to add the Great Auk to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

CENO-079 ARCHAEOTHERIUM

PaleoVentures presents the Archaeotherium as figure number 079 of its Ceno Series! 

Archaeotherium can be distinguished from other entelodonts by having an unusually long snout and large jugal flanges on the sides of its head! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 10 cm (4 in) long
• Approx. 5 cm (2 in) wide
• Approx. 6 cm (2.4 in) tall
• Made of PLA and hand-painted

Be sure to add the Archaeotherium to your prehistoric creature collection along with the other creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

UPCOMING MODELS - DINO SERIES WAVE 15

Paleo-Ventures teases the next wave of figures in its Dino Series! Try to guess what they are based on the preview picture and the clues below!

085 - ????

A titanosaur known from very complete fossils!

086 - ???

A smaller relative of Tyrannosaurus from Canada!

087 - ???

A crested theropod from Jurassic China!

088 - ???

The largest oviraptorosaur ever discovered!

089 - ???

A basal sauropodomorph from the early Jurassic of South Africa!

090 - ???

A Cretaceous predator originally thought to be part of the raptor family!

DINO-084 CAUDIPTERYX

 PaleoVentures presents the Caudipteryx as figure number 084 of its flagship Dino Series! 

The discovery of Caudipteryx has led to many intensive studies and debate over the relationship between birds and dinosaurs! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 10 cm (4 in) long
• Approx. 6.5 cm (2.5 in) tall
• Made of PLA and hand-painted

Be sure to add the Caudipteryx to your dinosaur collection along with the other prehistoric creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

DINO-083 EDMONTONIA

 PaleoVentures presents the Edmontonia as figure number 083 of its flagship Dino Series! 

Edmontonia was one of the largest members of the nodosaurid family, the family of ankylosaurs without tail clubs! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 4.5 cm (1.8 in) tall
• Made of PLA and hand-painted

Be sure to add the Edmontonia to your dinosaur collection along with the other prehistoric creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

DINO-082 QIANZHOUSAURUS

PaleoVentures presents the Qianzhousaurus as figure number 082 of its flagship Dino Series! 

With a long, slender snout resembling that of the Mongolian tyrannosaurid Alioramus, Qianzhousaurus confirms the wide distribution of long-snouted tyrannosaurids in Asia! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 6 cm (2.4 in) tall
• Made of PLA and hand-painted

Be sure to add the Qianzhousaurus to your dinosaur collection along with the other prehistoric creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

DINO-081 POSTOSUCHUS

PaleoVentures presents the Postosuchus as figure number 081 of its flagship Dino Series! 

Actually not a dinosaur, Postosuchus was one of the largest apex predators of the late Triassic and was very similar to a modern-day crocodile: it had bony osteoderms embedded on its skin as a form of heavy-duty armour, and its heel and ankle joints resemble those of modern crocodiles! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.7 in) long
• Approx. 4.5 cm (1.8 in) tall
• Made of PLA and hand-painted

Be sure to add the Postosuchus to your dinosaur collection along with the other prehistoric creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

DINO-080 MAIASAURA

 PaleoVentures presents the Maiasaura as figure number 080 of its flagship Dino Series! 

This discovery of fifteen juvenile Maiasaura very close to an adult showed the first evidence of parental and social behavior in dinosaurs, and firmly suggested that Maiasaura fed its young while they were in the nest! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.

Product Features

• Approx. 12 cm (4.4 in) long
• Approx. 5.5 cm (2.2 in) tall
• Made of PLA and hand-painted

Be sure to add the Maiasaura to your dinosaur collection along with the other prehistoric creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.

DINO-079 CETIOSAURUS

 PaleoVentures presents the Cetiosaurus as figure number 079 of its flagship Dino Series! 

Cetiosaurus is the first sauropod from which bones were described, and got its name from the fact that its fossil bones were originally thought to have been from a whale! Like all prehistoric creatures made for the PaleoVentures lines, this creature is brought to life in a cute and simplified appearance.8

Product Features

• Approx. 8.5 cm (3.3 in) long
• Approx. 7 cm (2.8 in) tall
• Made of PLA and hand-painted

Be sure to add the Cetiosaurus to your dinosaur collection along with the other prehistoric creatures from PaleoVentures and create fun and exciting scenes with them!

About This Product

• Images shown are sample prototypes. Some specifications may differ from the actual product.
• Paintwork is done by hand, therefore the final product may vary.